VLANstaticroute

2023年6月28日—Procedure·SelectoneormoredesiredVLANsandclickConfigureStaticRoute.TheConfigureStaticRoutepageisdisplayed.Youcanalsoclick ...,2023年11月3日—No,youdon'tneedtosetupastaticrouterule.Zyxellayer3switcheswillcreateastaticrouteruleautomaticallywhenyousetupanIP ...,2020年1月30日—I'mheretoaskaverynewbiequestion.Ihaveanetworkdividedbytwovlans(VLAN100-192.168.1.1;VLAN200-20.20.0.1),butineedt...

參考資訊如下
Configuring a Static Route for a VLAN

2023年6月28日 — Procedure · Select one or more desired VLANs and click Configure Static Route. The Configure Static Route page is displayed. You can also click ...

Do I need to set up static route rule for VLAN routing?

2023年11月3日 — No, you don't need to set up a static route rule. Zyxel layer 3 switches will create a static route rule automatically when you set up an IP ...

Is possible to configure intervlan routing with static routes?

2020年1月30日 — I'm here to ask a very newbie question. I have a network divided by two vlans (VLAN 100 - 192.168.1.1; VLAN 200 - 20.20.0.1), but i need to ...

Layer 3 Switch 的Routing 設定. 如果有多個vlan要做 ...

2021年4月5日 — 如果有多個vlan要做Routing的話，有個蠻好的解決方案是使用Layer 3 Switch做Routing，他的延展性很好，並且設定也很簡單. “Layer 3 Switch 的Routing ...

Route between VLANs

3) Enable a dynamic routing protocol or create static routes on the switch for the VLANs. For example: Switch A handles VLAN 10, subnet 192.168.1.0/24, switch B ...

Solved

When you define a static route it applies to all the vlans. If you want to have different static routes per vlan, you can put each vlan in a VRF Lite. This way ...

Static route states follow VLAN states

Static route states follow VLAN states. IP static routes remain in the IP route table only so long as the IP interface to the next-hop router is up.

Static routes and switches

2022年12月9日 — If the switch has a management ip you will need a static default route on it to the gateway for that management vlan. Anything else should ...

static routing through vlan

Hi all I have question related to static routing on l3 switches in this photo, static routing is configured through VLAN ... i know that we can configure ...

Working with VLAN interfaces and static routing

Static routes are entries placed manually into a Layer 3 device's routing table. Each route contains a destination network, normally expressed in classless ...